So I’ve been playing with the Pi again.
I’ve done a spot of admin, created a new user so that I can delete the default user (for security reasons). I’ve installed Apache, PHP and MySQL. I need Apache so I can use the Pi as a web server, while the other two will come in useful later on when I learn how to use PHP…
Next step will be to set up a copy of my current website and then, hopefully, set it up on the web so that others can see it.
Oh, one more thing. The Pi doesn’t come with a case. I could (and still might) cannibalise the plastic box it came in or I could buy one of the many cases on the market. Instead, I made a case from Lego which was much more fun.
Spent a fun few hours today playing with my Raspberry Pi.
I had already downloaded an OS in anticipation, so the first job was to flash it onto an SD card. I’ve used Raspbian Wheezy, which is a version of Debian optimised for the Pi and ideally suited for someone new to Pies (in other words, me!). For those who don’t know, the Pi doesn’t have a hard disk. In fact it doesn’t come with anything much. I bought a power supply for it, otherwise that’s it. So the OS is on a 4GB SD card, which I stuck in the Pi’s SD slot, I then connected an ethernet cable between the Pi and my router and plugged in the power supply. Voila!
It’s a long time since I used one of those old-fashioned PC things so although I have an old Apple USB mouse kicking around, I haven’t got a USB keyboard. That isn’t really a problem for me as I don’t intend to use it as a traditional computer. So the next step was to set the Pi up so I could access it remotely. On my Mac I used Airport Utility to find the Pi’s IP address, then I started a Terminal session and used ssh to connect to the Pi. At this point there were a couple of things to sort out. When you flash the OS to the card, the OS image effectively hides any remaining free space (about 2GB on my SD card), so I resized the partition so that the whole card was available, that means I can to add more programs etc. later on. The other thing was to allocate a static IP address to the Pi, if I left it to DHCP there’s no knowing what IP address it would get next time it booted and I’d have to keep looking it up (or guessing), which would be a pain.
There may be times when I want to run the GUI desktop so I installed a VNC server. “sudo apt-get install tightvncserver” did the trick. At the moment I will have to start the vnc server before I can use it, later on I can configure the Pi so that it starts up when the Pi boots if I find that’s necessary. At the client end,I’m using Chicken (of the VNC) on my Mac, I’ve also downloaded VNC and SHH Apps to my iPad so I’ve now got several ways to access the Pi. Here’s a screenshot from the Mac showing the Raspberry GUI.
That’s it for now, I’ve got quite a few more things which I want to do. I’ll keep you posted.
Well as you can surmise from the last post, my Raspberry Pi has arrived.
Okay, the post title is a bit lame.
I’ve ordered myself a Raspberry Pi. I have some plans for it, however RS say it won’t ship for about a week. I’ll keep you posted.